Types of faucet mounting

Do you want to install a new kitchen faucet or replace an old one? Well, you need to know the types of kitchen faucet mounts before installing them.

You may be thinking that the installation task is difficult. Through this plumbing blog, you will see how simple faucet plumbing is. However, in this guide, you will get a step by step procedure on how to install a kitchen faucet easily.

Kitchen Faucets Mounting Guide

It would help if you considered some essential things before you install a kitchen faucet. These things are:

• The type of mounting.
• The number of holes in your sink.
• The type of sink.
• Installation types.

What are the types of kitchen faucet mount?

Did you know that kitchen faucet mounting can be done in two main ways? Well, if you did not know, they are as follows:

• Deck mounting.

Have you seen a faucet that sits at the countertop? Now, that is a deck-mount faucet type.

When installing this type of faucet, you need to consider the number of holes existing on the sink. This will guide you when purchasing a new faucet. Usually, there are one to three holes in the sink. Count those holes, and you will know the right type of deck mount faucet to purchase.

Which are the deck mount faucet installation options?

Actually, there are four main options of faucet installation for deck- mount type of faucets. They are as follows:

1. Single-hole

If your countertop has a single hole, then you will need to purchase an integrated faucet. Have you seen a faucet that has both the handle and spout as a single set? Well, that’s a single-hole. The exciting thing about it is that it is simple to mount. Moreover, for this kind of faucet, you will need to have a small size sink. This is the easiest kitchen faucet to install.

2.  Center set

If your countertop has three existing holes, then you will need to purchase a center set faucet. Have you come across a faucet that has a separate spout and two handles that originate from a single plate? That’s a center set faucet. In this case, you need to have three predrilled holes before installation.

3. Widespread

What is a widespread type of faucet? Well, this is a faucet that looks close to the center set faucet. Though it has two handles, just like the center set type, they originate independently. To mount this type of faucet, your sink should have three holes. For a center set faucet, you need to know how to install a two-handle kitchen faucet. 

4. Vessel

Have you seen a taller than normal faucet? This kind of faucet is less common, and you may not have seen it. Besides the fact that it stands tall, it has an integrated handle and spout. You will only need a single hole on the countertop to mount it. You should also note that this faucet requires a special sink, one which is deep as well.

• Wall mounting.

Have you walked into a kitchen that has a faucet hanging from the wall? That’s a wall-mounted faucet. For this kind of mounting, you will need to purchase a separate wall valve and a spout. However, some types have an integrated valve and spout. You can mount yourself this faucet; besides, it allows you to clean your countertop easily.

Once you know the different types of mounting, it will be easier for you to install. Also, this information will guide you on the type of faucet to purchase.

How to install a kitchen faucet

Now that you know the different types of faucet mounting, here is a procedure to install it. It is simple, and you can do it yourself.

What are the things to consider before installation?

• If you are replacing an old faucet, the first thing to do is to remove the old faucet.
• If you are replacing the faucet, check the number of holes on the sink.
• If you are installing a new faucet, choose the faucet before the sink. This will guide you on the number of holes you will need in a sink.
• What type of faucet installation is suitable? There are two main types; the top-mount and the bottom- mount. If you have to fix the screws from the bottom of the counter, that’s a top-mount type of installation. On the other hand, if you fix the screws directly through the top, that’s bottom -mount installation.

What tools and materials are required?

• Slip-joint pliers
• Basin wrench
• Adjustable wrench
• Faucet assembly

Step by step procedure of installation 

1. 1. Turn off the water supply

When you access the area under the sink, and you will notice that there are valves. Use the valves to turn off the water completely. Once the valves are fully shut, turn on the faucet valve to drain the remaining water on the pipes. You will notice that there will be no water coming out of the faucet. But, if it continues to flow, ensure that you tighten the shutoff valves further.

1. 2. Uninstall the old faucet

You will need a basin wrench to uninstall the old faucet. Reach to the nuts that are situated at the back of the faucet and unscrew. Once you do that, you should be able to disconnect the supply tubes easily. Using the same tool, unscrew the nuts holding the faucet. Now lift the old faucet out. Ensure that the area where the old faucet was is thoroughly clean before you install a new one.

1. 3. Feed the faucet lines

Do you have the right type of faucet? Depending on the number of holes available, position all the lines appropriately. Do this by slipping in the new sprayer hose, the hot water supply, and the cold-water supply tubes.

1. 4. Install the washers and the nuts

You now need to install the nuts and the washers that will be used later to tighten the connections. Just slip these nuts from underneath on the hanging tubes.

1. 5. Connect the faucet lines to the main supply

Now, take the hanging tubes and connect to the supply lines. You have to attach the tubes and then use nuts to close the connections. Just be careful not to overtighten the nuts. Use an adjustable wrench to tighten the connections.

1. 6. Check for leaks

When you are done with the connection underneath, you are good to go. Simply do some checks before you are too sure. Turn on the valve underneath, do you see any leak? If the is no leak, turn on the faucet and check if there is any leak. If there is none, then you have installed your faucet successfully.

And this is simply how to install faucet.

You do not need a plumber since this is a simple do it yourself thing. You will be able to save some extra costs.

Conclusion

When you know the different types of faucet mounting, the installation task will be easy. You also need to be aware of the type of faucet to install. Your faucet can get faulty, and all you need to do is purchase a new one and install it yourself. Now you have seen how faucet installation is indeed simple. You only need a few tools and a simple step by step procedure to do it. I have made this guide to help you whether you are replacing your kitchen or bathroom faucet. Try today to replace your faucet yourself by following the procedure above; you will see that it is indeed simple.